76% Solids Polyaspartic - US76POLY
- Fast-curing, low-odor, 76% solids formula for quick project completion
- UV-stable, clear, non-yellowing finish maintains its appearance over time
- Strong adhesion to various substrates for versatile application
- High chemical and abrasion resistance ensures long-lasting durability
- Easy 1:1 mix ratio simplifies preparation and installation
- High-gloss, easy-to-clean surface enhances the beauty of any space
- Low VOC content for healthier indoor air quality and eco-friendly use
- Ideal for both interior and exterior settings, including high-traffic areas
- Suitable for a wide range of applications, from residential to industrial flooring
- Perfect for 1-day polyaspartic flooring systems and as a final layer for various installations
RESINUS US76POLY Polyaspartic Floor Coating
US76POLY is a versatile, low odor, 76% solids polyaspartic floor coating with a 1:1 mix ratio. Renowned for its high-gloss finish, fast curing, and low VOC content, this product is an ideal choice for creating durable and attractive flooring in both interior and exterior settings.
Product Highlights
- Fast setting with a working time of 10-15 minutes
- Clear, non-yellowing finish that is UV-stable
- Strong adhesion to a variety of substrates
- High chemical and abrasion resistance
- Easy 1:1 mix ratio for simplified preparation
- High gloss, easy-to-clean surface
- Low odor formula
Ideal Applications
- UV-stable top coats
- 1-day polyaspartic flooring systems
- Residential and industrial flooring
- High-traffic public spaces
- Marine and harsh environmental applications
- Aircraft hangars and auto service areas
- Workspaces and common areas
- Final layer for various flooring installations
Instructions
Ensure the surface is clean, dry, and free from any contaminants that could affect adhesion. Mechanically prepare the concrete to a CSP2 profile, typically by diamond grinding. New concrete must be cured for a minimum of 28 days. Repair any cracks prior to application.
Mix 1 part A with 1 part B by volume using a low-speed drill and jiffy mixer until the mixture is homogenous. Apply the coating at a rate of 150-200 sq. ft. per gallon, using a squeegee for the initial application followed by back-rolling with a 3/8" nap roller. In high heat or humidity conditions, use an 18" roller in a dip and roll method to adjust for the faster working time.
Avoid application at temperatures below 40°F or above 95°F, and in conditions where humidity exceeds 85% or the temperature is less than 5°F above the dew point. Ensure proper ventilation during installation and curing.
For detailed application instructions, please refer to the Technical Data Sheet.
- Base Coat: 150-200 sq. ft. per gallon
- Flake Floor Top Coat: 130-200 sq. ft. per gallon
- Metallic Floor Top Coat: 150-200 sq. ft. per gallon
- Solid Color Top Coat: 150-200 sq. ft. per gallon
2 Gallon Kits (1 Gallon Part A + 1 Gallon Part B)
- Solids content by volume: 76%
- Mix Ratio: 1 Part A to 1 Part B by Volume
- VOC (mixed): < 15 g/L
- Pot Life: 20 minutes
- Dry to Touch: 2-3 hours
- Light Foot Traffic: 12-24 hours
- Heavy Traffic: 24-48 hours
- Full Cure: 5 days
- Adhesion to Concrete: 600 psi
- Elongation (⅛" Mandrel): Pass
- Hardness (Shore D): 70
- Taber Abrasion: 30 mg loss
- Tensile Elongation: 100%
- Tensile Strength: > 2,000 psi
What is the pot life and working time of US76POLY?
A: US76POLY has a pot life of approximately 20 minutes and a working time of about 15-20 minutes at 75°F (24°C).
Can US76POLY be applied over existing epoxy coatings?
A: Yes, US76POLY can be applied over existing epoxy coatings after proper surface preparation and cleaning.
Is US76POLY UV stable for outdoor applications?
A: Yes, US76POLY is UV stable and suitable for outdoor applications, maintaining its clarity and resistance to yellowing.
How long does US76POLY take to cure?
A: US76POLY is typically dry to the touch in 2-3 hours, with light foot traffic allowed after 12-24 hours and heavy traffic after 24-48 hours. Full cure is achieved in 5 days.
What is the difference between US76POLY and traditional polyurethane coatings?
A: US76POLY offers faster curing times, better UV stability, and improved chemical resistance compared to traditional polyurethane coatings.