Epoxy Crack Filler Putty - US100CFP
- 100% solids, low VOC formula for eco-friendly and safe application
- Excellent adhesion and resistance to chemicals and wear for durable repairs
- Fast-drying with a 15-30 minute pot life, allowing quick progression of repair tasks
- Easy 1:1 mix ratio by volume simplifies preparation for professionals and DIY users
- Trowel-friendly consistency enables efficient crack repair and floor leveling
- Cures to a light gray finish, blending seamlessly with concrete surfaces
- Ideal for repairing cracks, defects, and spalling in vertical and horizontal concrete structures
- Versatile application for filling, leveling, and restoring damaged concrete floors
RESINUS US100CFP Epoxy Crack Filler Putty
US100CFP is a high-performance, 100% solids epoxy putty specifically designed for filling and repairing concrete cracks, spalling, and defects. Formulated to provide outstanding durability, this two-component product features a convenient 1:1 mix ratio, making it easy to prepare and apply.
Product Highlights
- 100% solids, low VOC formula
- Excellent adhesion and resistance to chemicals and wear for long-lasting repairs
- Fast-drying with a 15-30 minute pot life, enabling quick progression of repair tasks
- Easy 1:1 mix ratio by volume simplifies preparation for both professional and DIY users
- Trowel-friendly consistency allows for efficient crack repair and floor leveling
- Cures to a light gray finish
Ideal Applications
- Repairing cracks and defects in vertical and horizontal concrete structures
- Filling and leveling uneven concrete floors
- Restoring damaged concrete surfaces
Instructions
The concrete surface must be clean, dry, and free of any contaminants. Mechanically prepare the surface to achieve an ICRI-CSP2 profile to create the proper texture for adhesion.
Mix 1 part A with 1 part B of US100CFP until thoroughly blended, using a low-speed drill or stir stick. Ensure to scrape the sides and bottom of the container during mixing. Apply the epoxy putty using a trowel, putty knife, or similar tool, pushing it firmly into the crack or joint. Remove any excess material by scraping it flush with the surface.
Avoid application at temperatures below 40°F or above 95°F, and in conditions where humidity exceeds 85% or the temperature is less than 5°F above the dew point. Ensure proper ventilation during installation and curing for optimal results and safety.
For detailed application instructions, please refer to the Technical Data Sheet.
Theoretical coverage: 0.13 cubic feet or 1,228 lineal feet @ 1/8" x 1/8" per 1 Gallon Kit
1 Gallon Kits (1/2 Gallon Part A + 1/2 Gallon Part B in 1 Gallon cans)
- Solids content by volume: 100%
- Mix Ratio: 1 Part A to 1 Part B by Volume
- VOC (mixed): < 30 g/L
- Pot Life: 15-30 minutes
- Set-to-Touch: 1-2 hours
- Dry-Through: 3-5 hours
- Light Foot Traffic: 12-24 hours
- Heavy Traffic: 24-48 hours
- Full Cure: 7 days
What is the maximum crack width that US100CFP can fill?
A: US100CFP can fill cracks up to 1/2" wide in a single application. For wider cracks, multiple applications may be necessary.
How long does US100CFP take to cure?
A: US100CFP is typically set-to-touch in 1-2 hours, dry-through in 3-5 hours, and ready for light foot traffic in 12-24 hours. Full cure is achieved in 7 days.
Can US100CFP be sanded or grinded after curing?
A: Yes, US100CFP can be sanded or ground after curing to achieve a smooth, level surface.
Is US100CFP suitable for use on vertical surfaces?
A: Yes, US100CFP can be used on both horizontal and vertical concrete surfaces, making it suitable for repairing walls and other vertical structures.
Can US100CFP be colored to match the surrounding concrete?
A: US100CFP cures to a light gray color, which may be suitable for matching most concrete surfaces. However, it cannot be custom colored.